Shandong China Coal Industry&Mining Supplies Group
Add to Cart
Product Introduction
The PCX crusher, a new generation of high-efficiency crusher, is designed and manufactured through optimized design by introducing German advanced technology and structure improvement. With the reasonable combination of multi-cavity crushing rooms and the novel convenient double-adjustment structure, it can ensure that the grain size of 85 percent of discharging materials is below 3ram, and the grain size of products is small and uniform; because of the use of the convenient repairing and maintaining devices.
Main Characteristics
1. Simply structure,reliable operation and easy to maintain. 2. High crushing ratio , small and even granularity (D90≤5mm in one work cycle) 3. Changing the three crushing stages flow to two crushing stages,energy saving over 40% than multi-stage crushers. 4. Long service life, lower cost of operation, maintenance . 5. Wear resistant hammer heads,longer serice life,high capacity and easy adjusting of discharging grid plate. 6. 20 mins can finished the complete checkup for the equipment by one person. 7. The investment scale is 50% lower than trational technology and equipments,but output is 40% higher,lower maintenance costs,it has been widely used in aggreagte making,cement.refractory andmetallurgy industries.
Operating Principle
The impact crusher uses plate hammer on the rapidly rotating rotor to generate high-speed impact to crush the materials in the crushing cavity, and casts the crushed materials along tangential direction to impact plate at the other end of the crushing cavity. The materials are crushed again, and then, they return to the plate hammer to undergo the process above repeatedly .
Main Benefits
1.Produce a highly cubical product.
2.Hammer is made of high chrome; liner board is made of wearable materials.
3.No Weld Build-Up Required on Wear Surfaces.
4.Long Life of Wear Components Due to Advanced Metallurgy.
5. Final products is cubic, discharge opening is adjustable.
6.Easy maintenance and reliable operation .
Technical Parameters
Model | Maximum Feeding Material Grain Size | Average Material-discharging Grain Size | Treating Capacity | Motor Power | Dimensional Size (length*width*height) | |
(mm) | (mm) | Cement Clinker | limestone | (kw) | (mm) | |
PCX-8040 | 80 | 3 | 15-20 | 20-25 | 37 | 1395×1506×1390 |
PCX-8080 | 80 | 3 | 25-30 | 30-40 | 45 | 1395×1906×1390 |
PCX-9040 | 100 | 3 | 30-35 | 35-40 | 45 | 1745×1575×1659 |
PCX-9080 | 100 | 3 | 40-45 | 45-50 | 55 | 1745×1906×1659 |
PCX-9010 | 100 | 3 | 45-50 | 50-55 | 75 | 1745×2176×1659 |
PCX-1010 | 150 | 3-5 | 50-60 | 60-70 | 90 | 2130×2590×2021 |
PCX-1210 | 200 | 3-5 | 70-80 | 80-90 | 110 | 2524×2716×2325 |
PCX-1212 | 200 | 3-5 | 90-100 | 90-110 | 132 | 2524×2866×2325 |
PCX-1414 | 200 | 5-8 | 110-150 | 120-160 | 200 | 2550×3120×2670 |
PCX-1616 | 200 | 5-8 | 170-210 | 210-260 | 250 | 2922×3564×2900 |
PCX-1818 | 200 | 5-10 | 250-270 | 280-310 | 315 | 3121×3754×3150 |
